HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 410JST (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, ◆ 1.25Pitch JST servo connectors, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
2.4G 6-CHANNEL MICROLITE DSM2 /DSMX RECEIVER SBUS610E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 6-Channel and 1 SBUS output Full-Range DSM2 Receiver and 1 SBUS output |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 50x30x13mm |
| ◆ Voltage Range | 3.6-9.6v |
| ◆ Antenna Length Main RX | 30mm*2 |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 8g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 6channels ◆ 1channels SBUS output ◆ ...3 Reviews
HiModel
2.4G 3-CHANNEL MICROLITE DSM2 /DSMX RECEIVER S3100E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 3-Channel Full-Range DSM2 Receiver （1 S.BUS output） |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 3channels ◆ 1channels S.BUS output（1S.BUS output） ...3 Reviews
HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 4100E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
13PCS HOBBY KNIFE SET
, , , , , , Specifications:, , , , , , , , , , , Hobby knife set, , ,
Includes/Requires: Include:3 x metal handles 1 x plastic handle (use ...HiModel
1/16TH SCALE NITRO ON ROAD TOURING CAR RTR S94282
| Length | 265mm |
| Width | 140mm |
| Height | 80mm |
| Wheelbase | 174mm |
| Gear Ratio | 10.6 |
| Ground clearance | 8mm |
| Diameter of Wheel | 49 x 18mm |
, , , , , , Specifications:, , , , , , , , , , , * The pattern and color of the cover may vary from the picture., , ,
Features: Hi-speed manufatured 1/16 scale on-road touring car. Other than ...HiModel
T-REX 450XL(CDE)CCPM KIT +420LF3200+25A ESC
| *Length | 650mm |
| *Height | 230mm |
| *Main Rotor | 680/700mm |
| *Tail Rotor | 150mm |
| *Motor Gear | 15T/13T/11T |
| *Main Gear | 150T |
| *Autorotation Tail Drive Gear | 109T |
| *Tail Drive Gear | 22T |
| *Weight(without power system) | 325/345g |
| *Weight(including power system) | About 610-650g |
, , , , , , Specifications:, , , , , , , , , , , *Drive Gear Ratio:, 1:10:4.95/1:11.5:4.95/1:13.6:4.95, , ,
Features: **Kits Packing** Product package: a T-REX 450XL helicopter's kit, ...HiModel
T-REX 450XL(HDE) KIT + 430L3550 MOTOR +25A ESC
| ●Length | 650mm |
| ●Height | 230mm |
| ●Main Rotor | 680/700mm |
| ●Tail Rotor | 150mm |
| ●Motor Gear | 15T/13T/11T |
| ●Main Gear | 150T |
| ●Autorotation Tail Drive Gear | 109T |
| ●Tail Drive Gear | 22T |
| ●Weight(without power system) | 330/355g |
| ●Weight(including power system) | About 620-670g |
, , , , , , Specifications:, , , , , , , , , , , ●Drive Gear Ratio:, 1:10:4.95/1:11.5:4.95/1:13.6:4.95, , ,
Features: 【Kits Packing】 Product package: a T-REX 450XL helicopter's kit, ...HiModel
FY21AP FPV INERTIAL ATTITUDE STABILIZER(TRADE EDITION) FY-21AP
| Incorporating the AP117 OSD module transmits these parameters | *altitude |
| Additional data can be interfaced to your PC via the Data Radio Link Module upgrade | *longitude |
| Any other configuration, please e-mail us for enquiry | feiyudz@hotmail.com |
| Includes | FY21AP (2.0) Module |
Features:, , In addition, barometric pressure data allows precise altitude hold capability. Beyond providing stabilization for the RC Pilot, under any flight conditions, connections to our other modules allow enhancements such as:, *auto-return to launch site, The FY-21AP can be installed in the following aircrafts:, Normal / Traditional fixed-wing planes, Remote Control system requirement:, The FY-21AP has been tested to work with the following RC systems:, Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, Includes/Requires:, , Resources:, Download Software and instruction manual.,
1. Briefly introduce The FY21AP is a stand-alone autopilot system ...HiModel
2.4G CORONA DSSS 14-CHANNEL RECEIVER CR14
| Type | CR14 DSSS |
| Size | 37.5X52.5X16MM |
| Weight | 21g |
| Range | >1500M |
| Sensitivity | -100dbm |
| Operating voltage | 4.8V-6V |
| Operating current | 40mA |
| Compatible with | CT14F |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specs:, Number of Channel: 14, , ,
Features: The new lightweight, advanced technology unit has the following ...1 Reviews
HiModel
2.4G CORONA DSSS 14-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT14F, RX CR14)
| Type | CT14F DSSS |
| Size | 54X30X25MM |
| Weight | 27g |
| Operating voltage | 5V (Futaba) |
| Operating current | 150mA |
| Compatible with | FUTABA |
| Type | CR14 DSSS |
| Size | 37.5X52.5X16MM |
| Weight | 21g |
| Range | >1500M |
| Sensitivity | -100dbm |
| Operating voltage | 4.8V-6V |
| Operating current | 40mA |
| Compatible with | CT14F |
, , , , , , Specifications:, , , , , , , , , , , RF Module Specs:, Output Power: , Receiver Specs:, Number of Channel: 14, , ,
Features: The new lightweight, advanced technology unit has the following ...6 Reviews
HiModel
CORONA 2.4GHZ DIY DSSS TRANSMITTING MODULE AND RECEIVER CT8Z/CR8D
| Type | CT8Z DSSS |
| Size | 38.5*21.8*6.5mm |
| Operating voltage | 8V-13V |
, , , , , , Specifications:, , , , , , , , , , , Weight: 5g, Operating current: , Output Power:, ,
Features: Features of Corona 2.4GHz DIY transmitting module and receiver ...3 Reviews
HiModel
SKYRC MULTI-FUNCTION WATT METER
| Voltage | 0-60V (*1), resolution 0.01V |
| Current | 0-100A peak (*2), resolution 0.01A |
| Power | 0-6000 W, resolution 0.1W |
| Charge | 0-65Ah, resolution 0.1mAh |
| Energy | 0-6554Wh, resolution 0.1KWh |
| Temperature | 0-150℃/ 32°F - 302°F |
| Auxiliary power | 4-60V |
| Dimensions | 51.3 x 42.9 x 13.7mm |
| Net weight | 42g/ 1.48oz |
| Display | 26.5 x 28.5mm LCD |
, , , , , , Specifications:, , , , , , , , , , , Note:, (*1) 0V minimum with auxiliary power, (*2) 50A continuous, 100A peak, assumes device's wire are in free air and attached to connections at or below temperature of 35 flow. 100A operation time depends on ambient temperature and wiring temperature., You can calibrate all values to zero by pressing 'SW' button for more than 3 seconds., , ,
Features: FEATURES Measures energy (Wh), charge (Ah), power (W), current ...